June 04, 2015

New Centre Leg - 1.2 - curved area

Started to shape the wood filler I had applied yesterday and trimmed off excess material.

Then after work, I applied more filler to the curved section and also all over to cover the visible wood grain and joins.
I needed to fill in some gaps with 8mm thick wood off cuts. These were wood glued into place and after wood filler was applied.
R5D4 centre legR5D4 centre leg

R5D4 centre legR5D4 centre leg
The angle still needs to be cut on this new piece, once the glue has fully dried.
Wood filler was then applied all over this to cover the wood grain, even though it won't be seen lol.

No comments:

Post a Comment