June 03, 2015

New Centre Leg - 1.1

So yesterday lunchtime I got on with cutting out wood. Though I didn't have any 8mm material available, so that had to wait till the evening.

Once home I got on with finishing off cutting the back pieces at the shorter length, and finding some spare 8mm thick material, made up the rest of the leg to correct'ish thickness.
R5D4, film accurate centre legR5D4, film accurate centre leg

Here you can see the pieces countersunk screwed together. The square edge on the left will be measured and cut to add extra stability to the centre foot location locking.

Next I unscrewed and started work on the curved ankle section, see next blog update soon.

No comments:

Post a Comment