April 30, 2013

Large Data Port [L.D.P.] upgrade

After saturday's event, there are a list of things I need to sort out/change/complete.

Firstly is the Large Data Port. I followed the plans, but probably didn't work out the off set. So mine appeared to 'stick out' to far. Easily sorted. I pulled it off [as it's not permanently fixed yet] and marked about 5mm to come off the front. Then I used my coping saw to trim it down.

Today in work I used the belt sander to smooth the cut edge.

Then applied primer. And finally blue paint.

No comments:

Post a Comment